When you’re ready to install a new shingle roof on your home, there are a few things you need to know. In general, the shingle roof installation process begins at the lower edge of the roof and proceeds upward towards the ridge. To start, install the first course of shingles, overlapping the drip edge by about half to 3/4 of an inch. Then, use roofing nails to secure the shingles to the roof deck. Before you install the next course, snap a chalk line along the underlayment to mark the upper edge. Most roofers use a nail gun to drive the fasteners.
You will also need to install film strips on the back of the shingles to prevent them from sticking together when laying in bundles. These strips also prevent dirt from entering the adhesive. If you don’t want to use them, you can skip the application process. However, it’s important to note that in cold climates, the adhesive strip may not set, and you may have to manually seal the seams. You can also place plastic roof cement under the tabs to ensure a strong seal.
Shingle roofs are one of the most popular roofing types in the United States. They are cost-efficient, suitable for most roof pitches, and are widely available. They are also lightweight and can be used on many types of roofs, including flat roofs. Shingles are also a great choice if you’re looking to improve the energy efficiency of your home.
If you’re looking to sell your home, a new shingle roof can add up to $10,000 to your home’s value. Depending on the materials used, a newly installed shingle roof can last for 30 years or even longer. The cost of a new shingle roof will depend on the type and the way that the roofing technician installs it.
A good roof can enhance the look of your home. Shingles are an affordable and popular roofing option, and they come in a variety of colors and styles. A reputable roofing company can help you choose the best option for your home. They can also help you choose the right materials for your home. If you have the budget, you can hire a professional roofing company to do the installation for you.
Shingles are also easier to repair and install than metal roofing. Unlike metal, shingles can be walked on. Its traction makes it easier for installers to walk on them and prevent slipping. Metal, on the other hand, should not be subjected to foot traffic since it can buckle and dent under pressure. Shingles can be purchased at big box stores and local distributors.
If you’re ready to install a shingle roof on your home, contact Heartland Roofing & Construction. These roofing contractors offer quality installation and high-quality asphalt shingles. When you hire them to install a new shingle roof, you’ll get a roof that meets your home’s requirements.
When installing a new shingle roof, you need to pay close attention to details. First, you have to follow the manufacturer’s specifications for nailing. In general, nails should penetrate the sheathing by about 1/4 inch, while staples should penetrate the roof by about 3/4 inch. Make sure to drive the nails or staples straight and flush with the surface of the shingles. Don’t drive them too deeply, because overdriven nails and staples can crack the shingles, especially in cold weather.